106 lines
3.7 KiB
C++
106 lines
3.7 KiB
C++
/*
|
|
LoRa Duplex communication
|
|
|
|
Sends a message every half second, and polls continually
|
|
for new incoming messages. Implements a one-byte addressing scheme,
|
|
with 0xFF as the broadcast address.
|
|
|
|
Uses readString() from Stream class to read payload. The Stream class'
|
|
timeout may affect other functuons, like the radio's callback. For an
|
|
|
|
created 28 April 2017
|
|
by Tom Igoe
|
|
*/
|
|
#include <SPI.h> // include libraries
|
|
#include <LoRa.h>
|
|
|
|
const int csPin = 7; // LoRa radio chip select
|
|
const int resetPin = 6; // LoRa radio reset
|
|
const int irqPin = 1; // change for your board; must be a hardware interrupt pin
|
|
|
|
String outgoing; // outgoing message
|
|
|
|
byte msgCount = 0; // count of outgoing messages
|
|
byte localAddress = 0xBB; // address of this device
|
|
byte destination = 0xFF; // destination to send to
|
|
long lastSendTime = 0; // last send time
|
|
int interval = 2000; // interval between sends
|
|
|
|
void setup() {
|
|
Serial.begin(9600); // initialize serial
|
|
while (!Serial);
|
|
|
|
Serial.println("LoRa Duplex");
|
|
|
|
// override the default CS, reset, and IRQ pins (optional)
|
|
LoRa.setPins(csPin, resetPin, irqPin);// set CS, reset, IRQ pin
|
|
|
|
if (!LoRa.begin(915E6)) { // initialize ratio at 915 MHz
|
|
Serial.println("LoRa init failed. Check your connections.");
|
|
while (true); // if failed, do nothing
|
|
}
|
|
|
|
Serial.println("LoRa init succeeded.");
|
|
}
|
|
|
|
void loop() {
|
|
if (millis() - lastSendTime > interval) {
|
|
String message = "HeLoRa World!"; // send a message
|
|
sendMessage(message);
|
|
Serial.println("Sending " + message);
|
|
lastSendTime = millis(); // timestamp the message
|
|
interval = random(2000) + 1000; // 2-3 seconds
|
|
}
|
|
|
|
// parse for a packet, and call onReceive with the result:
|
|
onReceive(LoRa.parsePacket());
|
|
}
|
|
|
|
void sendMessage(String outgoing) {
|
|
LoRa.beginPacket(); // start packet
|
|
LoRa.write(destination); // add destination address
|
|
LoRa.write(localAddress); // add sender address
|
|
LoRa.write(msgCount); // add message ID
|
|
LoRa.write(outgoing.length()); // add payload length
|
|
LoRa.print(outgoing); // add payload
|
|
LoRa.endPacket(); // finish packet and send it
|
|
msgCount++; // increment message ID
|
|
}
|
|
|
|
void onReceive(int packetSize) {
|
|
if (packetSize == 0) return; // if there's no packet, return
|
|
|
|
// read packet header bytes:
|
|
int recipient = LoRa.read(); // recipient address
|
|
byte sender = LoRa.read(); // sender address
|
|
byte incomingMsgId = LoRa.read(); // incoming msg ID
|
|
byte incomingLength = LoRa.read(); // incoming msg length
|
|
|
|
String incoming = "";
|
|
|
|
while (LoRa.available()) {
|
|
incoming += (char)LoRa.read();
|
|
}
|
|
|
|
if (incomingLength != incoming.length()) { // check length for error
|
|
Serial.println("error: message length does not match length");
|
|
return; // skip rest of function
|
|
}
|
|
|
|
// if the recipient isn't this device or broadcast,
|
|
if (recipient != localAddress && recipient != 0xFF) {
|
|
Serial.println("This message is not for me.");
|
|
return; // skip rest of function
|
|
}
|
|
|
|
// if message is for this device, or broadcast, print details:
|
|
Serial.println("Received from: 0x" + String(sender, HEX));
|
|
Serial.println("Sent to: 0x" + String(recipient, HEX));
|
|
Serial.println("Message ID: " + String(incomingMsgId));
|
|
Serial.println("Message length: " + String(incomingLength));
|
|
Serial.println("Message: " + incoming);
|
|
Serial.println("RSSI: " + String(LoRa.packetRssi()));
|
|
Serial.println("Snr: " + String(LoRa.packetSnr()));
|
|
Serial.println();
|
|
}
|
|
|