106 lines
No EOL
2.8 KiB
C++
106 lines
No EOL
2.8 KiB
C++
/*
|
|
* 31 mar 2015
|
|
* This sketch display UDP packets coming from an UDP client.
|
|
* On a Mac the NC command can be used to send UDP. (nc -u 192.168.1.101 2390).
|
|
*
|
|
* Configuration : Enter the ssid and password of your Wifi AP. Enter the port number your server is listening on.
|
|
*
|
|
13 apr 2015. Partly working. Packets are received and displayed, but the confirmation packet is not received by the client.
|
|
Tested with Mac as client using netcat (nc -u 192.168.1.101 2390)
|
|
|
|
*/
|
|
#include <ESP8266WiFi.h>
|
|
#include <WiFiUDP.h>
|
|
|
|
int status = WL_IDLE_STATUS;
|
|
const char* ssid = "yourssid"; // your network SSID (name)
|
|
const char* pass = "yourpassword"; // your network password
|
|
|
|
unsigned int localPort = 2390; // local port to listen for UDP packets
|
|
|
|
byte packetBuffer[512]; //buffer to hold incoming and outgoing packets
|
|
|
|
// A UDP instance to let us send and receive packets over UDP
|
|
WiFiUDP Udp;
|
|
|
|
// Multicast declarations
|
|
IPAddress ipMulti(239, 0, 0, 57);
|
|
unsigned int portMulti = 12345; // local port to listen on
|
|
|
|
void setup()
|
|
{
|
|
// Open serial communications and wait for port to open:
|
|
Serial.begin(115200);
|
|
|
|
// setting up Station AP
|
|
WiFi.begin(ssid, pass);
|
|
|
|
// Wait for connect to AP
|
|
Serial.print("[Connecting]");
|
|
Serial.print(ssid);
|
|
int tries=0;
|
|
while (WiFi.status() != WL_CONNECTED) {
|
|
delay(500);
|
|
Serial.print(".");
|
|
tries++;
|
|
if (tries > 30){
|
|
break;
|
|
}
|
|
}
|
|
Serial.println();
|
|
|
|
|
|
printWifiStatus();
|
|
|
|
Serial.println("Connected to wifi");
|
|
Serial.print("Udp Multicast server started at : ");
|
|
Serial.print(ipMulti);
|
|
Serial.print(":");
|
|
Serial.println(portMulti);
|
|
Udp.beginMulticast(WiFi.localIP(), ipMulti, portMulti);
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
int noBytes = Udp.parsePacket();
|
|
if ( noBytes ) {
|
|
Serial.print(millis() / 1000);
|
|
Serial.print(":Packet of ");
|
|
Serial.print(noBytes);
|
|
Serial.print(" received from ");
|
|
Serial.print(Udp.remoteIP());
|
|
Serial.print(":");
|
|
Serial.println(Udp.remotePort());
|
|
// We've received a packet, read the data from it
|
|
Udp.read(packetBuffer,noBytes); // read the packet into the buffer
|
|
|
|
// display the packet contents in HEX
|
|
for (int i=1;i<=noBytes;i++){
|
|
Serial.print(packetBuffer[i-1],HEX);
|
|
if (i % 32 == 0){
|
|
Serial.println();
|
|
}
|
|
else Serial.print(' ');
|
|
} // end for
|
|
Serial.println();
|
|
|
|
// send a reply, to the IP address and port that sent us the packet we received
|
|
Udp.beginPacket(Udp.remoteIP(), Udp.remotePort());
|
|
Udp.write("UDP packet received");
|
|
Udp.endPacket();
|
|
} // end if
|
|
|
|
|
|
|
|
}
|
|
|
|
void printWifiStatus() {
|
|
// print the SSID of the network you're attached to:
|
|
Serial.print("SSID: ");
|
|
Serial.println(WiFi.SSID());
|
|
|
|
// print your WiFi shield's IP address:
|
|
IPAddress ip = WiFi.localIP();
|
|
Serial.print("IP Address: ");
|
|
Serial.println(ip);
|
|
} |