LoRaWAN-Signal-Mapping/iot/main/main.ino

#include "settings.h"
#include <Arduino.h>
#ifdef ENABLE_MEMORY_DIAGNOSTICS
// #include <MemoryFree.h>
#define DISPLAY_FREE_MEMORY()	Serial.println(freeMemory(), DEC);
#else
#define DISPLAY_FREE_MEMORY()	// noop
#endif

#include "random.h"
// BAD PRACTICE: For some extremely strange reason, the Arduino IDE doesn't pick up random.cpp like it does our other source files - so we've got to explicitly include it here. If we had control over the build process (which we don't), we've use a Makefile here that handled this better.
#include "random.cpp"
#include "gps.h"
#include "peripheral.h"
#include "storage.h"
#include "power.h"
#include "transmission.h"


void setup() {
	Serial.begin(BAUD_PC);
	Serial.println(F("[main] Starting"));
	random_begin();
	
	DISPLAY_FREE_MEMORY();
	GPSLocation gps_data = gps_fetch();
	DISPLAY_FREE_MEMORY();
		
	Serial.print(F("[main] Location ")); Serial.print(gps_data.lat); Serial.print(F(", ")); Serial.println(gps_data.lng);
	
	uint32_t id = random_get();
	
	Serial.print(F("[main] Id "));
	Serial.println(id);
	
	// Activate microSD card breakout board on the SPI bus
	
	peripheral_register(PIN_SPI_CS_RFM95);
	peripheral_register(PIN_SPI_CS_SD);
	
	peripheral_unsilence(PIN_SPI_CS_SD);
	
	DISPLAY_FREE_MEMORY();
	store_reading(id, gps_data);
	DISPLAY_FREE_MEMORY();
	#ifdef SD_DEBUG_ENABLED
	store_debug(gps_data.time, 19 - 1); // Don't print the null byte
	DISPLAY_FREE_MEMORY();
	#endif
	
	// ------------------------------------------------------------------------
	
	// Activate the RFM95
	peripheral_switch(PIN_SPI_CS_SD, PIN_SPI_CS_RFM95);
	
	const uint8_t message_size = sizeof(uint32_t) + sizeof(float)*2;
	uint8_t message[message_size];
	
	const uint8_t* bytes_id = reinterpret_cast<uint8_t const *>(&id);
	const uint8_t* bytes_lat = reinterpret_cast<uint8_t const *>(&(gps_data.lat));
	const uint8_t* bytes_lng = reinterpret_cast<uint8_t const *>(&(gps_data.lat));
	
	for(int i = 0; i < sizeof(uint32_t); i++) {
		message[i] = bytes_id[i];
	}
	for(int i = 0; i < sizeof(float); i++) {
		message[sizeof(uint32_t) + i] = bytes_lat[i];
		message[sizeof(uint32_t) + sizeof(float) + i] = bytes_lng[i];
	}
	
	#ifdef ENABLE_RADIO
	Serial.println(F("[main] Transmitting"));
	transmit_init();
	transmit_send(message, message_size);
	#endif
	
	power_off(); // Doesn't return
}

void loop() {
	
}