LoRaWAN-Signal-Mapping/README.md

# Msc-Summer-Project

> My Msc Summer Project

## Hardware Used
 - [RFM95 w/ breakout](https://onecall.farnell.com/seeed-studio/114990615/868mhz-dragino-lora-shield-for/dp/SC14518) (alternatively [this](https://shop.pimoroni.com/products/adafruit-rfm95w-lora-radio-transceiver-breakout?variant=19595325639))
 - [GPS](https://www.hobbytronics.co.uk/ublox-gps-neo6m) (or [this](https://thepihut.com/products/gps-module-with-enclosure?variant=27741075537))
 - [microSD breakout](https://www.hobbytronics.co.uk/microsd-card-regulated-v2)
 - DC in + USB-a power regulator (or maybe [this](https://www.adafruit.com/product/1833))
 - [microSD Card](https://smile.amazon.co.uk/SanDisk-microSDHC-Memory-Adapter-Performance/dp/B073K14CVB/) - any card that's 1GiB+ will do.
 - [Arduino Uno](https://smile.amazon.co.uk/Elegoo-Board-ATmega328P-ATMEGA16U2-Arduino/dp/B01EWOE0UU/)
 - [Breadboard](https://shop.pimoroni.com/products/solderless-breadboard-400-point)
 - Jumper cables (e.g. [a](https://thepihut.com/products/adafruit-premium-female-male-extension-jumper-wires-20-x-3), [b](https://thepihut.com/products/adafruit-premium-male-male-jumper-wires-20-x-6-150mm), and [c](https://thepihut.com/products/adafruit-premium-female-female-jumper-wires-20-x-6-150mm))
 - [Battery](https://smile.amazon.co.uk/Anker-PowerCore-Aluminum-Portable-Lipstick-Sized-Black/dp/B005QI1A8C/) - Size currently unknown - I'll need to run some tests to see how much power it uses to figure out the right battery size.
 - [Project box](https://smile.amazon.co.uk/waterproof-plastic-Enclosure-Power-junction-Grey/dp/B01JHBHNMA/) - if we can't 3D print one
 - [TPL-5111](https://www.adafruit.com/product/3573) - also available from Pimoroni

## Getting Started
Run `bash ./build setup` from the command line at the root of this repository.

### IoT Device
 - Copy `settings.custom.cpp.example` to `settings.custom.cpp` and fill in the fields there
 - Review `settings.h` to make sure it matches your setup
 - Copy the folders in `iot/libraries` to your Arduino IDE libraries folder

## Useful Links
 - Entropy extraction from the watchdog timer vs the internal clock: https://github.com/taoyuan/Entropy
Initial commit 2019-05-01 18:42:01 +00:00			`# Msc-Summer-Project`

Fold parts list into README 2019-05-20 10:55:28 +00:00			`> My Msc Summer Project`

			`## Hardware Used`
			`- [RFM95 w/ breakout](https://onecall.farnell.com/seeed-studio/114990615/868mhz-dragino-lora-shield-for/dp/SC14518) (alternatively [this](https://shop.pimoroni.com/products/adafruit-rfm95w-lora-radio-transceiver-breakout?variant=19595325639))`
			`- [GPS](https://www.hobbytronics.co.uk/ublox-gps-neo6m) (or [this](https://thepihut.com/products/gps-module-with-enclosure?variant=27741075537))`
			`- [microSD breakout](https://www.hobbytronics.co.uk/microsd-card-regulated-v2)`
			`- DC in + USB-a power regulator (or maybe [this](https://www.adafruit.com/product/1833))`
			`- [microSD Card](https://smile.amazon.co.uk/SanDisk-microSDHC-Memory-Adapter-Performance/dp/B073K14CVB/) - any card that's 1GiB+ will do.`
			`- [Arduino Uno](https://smile.amazon.co.uk/Elegoo-Board-ATmega328P-ATMEGA16U2-Arduino/dp/B01EWOE0UU/)`
			`- [Breadboard](https://shop.pimoroni.com/products/solderless-breadboard-400-point)`
			`- Jumper cables (e.g. [a](https://thepihut.com/products/adafruit-premium-female-male-extension-jumper-wires-20-x-3), [b](https://thepihut.com/products/adafruit-premium-male-male-jumper-wires-20-x-6-150mm), and [c](https://thepihut.com/products/adafruit-premium-female-female-jumper-wires-20-x-6-150mm))`
			`- [Battery](https://smile.amazon.co.uk/Anker-PowerCore-Aluminum-Portable-Lipstick-Sized-Black/dp/B005QI1A8C/) - Size currently unknown - I'll need to run some tests to see how much power it uses to figure out the right battery size.`
			`- [Project box](https://smile.amazon.co.uk/waterproof-plastic-Enclosure-Power-junction-Grey/dp/B01JHBHNMA/) - if we can't 3D print one`
			`- [TPL-5111](https://www.adafruit.com/product/3573) - also available from Pimoroni`
Create entropy test sketch for random ids 2019-05-22 23:43:06 +00:00
Weave LMIC into the main sketch, but its now made it too big :-/ 2019-06-24 14:43:04 +00:00			`## Getting Started`
			Run `bash ./build setup` from the command line at the root of this repository.

			`### IoT Device`
			- Copy `settings.custom.cpp.example` to `settings.custom.cpp` and fill in the fields there
			- Review `settings.h` to make sure it matches your setup
			- Copy the folders in `iot/libraries` to your Arduino IDE libraries folder
Create entropy test sketch for random ids 2019-05-22 23:43:06 +00:00
			`## Useful Links`
			`- Entropy extraction from the watchdog timer vs the internal clock: https://github.com/taoyuan/Entropy`