63 lines
1.6 KiB
C++
63 lines
1.6 KiB
C++
#include "settings.h"
|
|
#include <Arduino.h>
|
|
#include <TinyGPS++.h>
|
|
#include <MemoryFree.h>
|
|
|
|
#include "random.h"
|
|
// BAD PRACTICE: For some extremely strange reason, the Arduino IDE doesn't pick up random.cpp like it does our other source files - so we've got to explicitly include it here. If we had control over the build process (which we don't), we've use a Makefile here that handled this better.
|
|
#include "random.cpp"
|
|
#include "gps.h"
|
|
#include "peripheral.h"
|
|
#include "storage.h"
|
|
#include "power.h"
|
|
#include "transmission.h"
|
|
|
|
|
|
void setup() {
|
|
Serial.begin(BAUD_PC);
|
|
Serial.println(F("[main] Starting"));
|
|
random_begin();
|
|
|
|
Serial.println(freeMemory(), DEC);
|
|
GPSLocation gps_data = gps_fetch();
|
|
Serial.println(freeMemory(), DEC);
|
|
|
|
Serial.print(F("[main] Location ")); Serial.print(gps_data.lat); Serial.print(F(", ")); Serial.println(gps_data.lng);
|
|
|
|
uint32_t id = random_get();
|
|
|
|
Serial.print(F("[main] Id "));
|
|
Serial.println(id);
|
|
|
|
// Activate microSD card breakout board on the SPI bus
|
|
|
|
peripheral_register(PIN_SPI_CS_RFM95);
|
|
peripheral_register(PIN_SPI_CS_SD);
|
|
|
|
peripheral_unsilence(PIN_SPI_CS_SD);
|
|
|
|
Serial.println(freeMemory(), DEC);
|
|
store_reading(id, gps_data);
|
|
Serial.println(freeMemory(), DEC);
|
|
#ifdef SD_DEBUG_ENABLED
|
|
store_debug(gps_data.time, 19 - 1); // Don't print the null byte
|
|
Serial.println(freeMemory(), DEC);
|
|
#endif
|
|
|
|
// ------------------------------------------------------------------------
|
|
|
|
// Activate the RFM95
|
|
peripheral_switch(PIN_SPI_CS_SD, PIN_SPI_CS_RFM95);
|
|
|
|
uint8_t message[] = "testing";
|
|
|
|
// transmit_init();
|
|
// transmit_send(message, 7);
|
|
|
|
|
|
power_off(); // Doesn't return
|
|
}
|
|
|
|
void loop() {
|
|
|
|
}
|