parent
315a0be156
commit
6f309c95fa
@ -0,0 +1,87 @@ |
||||
/*
|
||||
SD card read/write |
||||
|
||||
This example shows how to read and write data to and from an SD card file |
||||
The circuit: |
||||
* SD card attached to SPI bus as follows: |
||||
** MOSI - pin 11 |
||||
** MISO - pin 12 |
||||
** CLK - pin 13 |
||||
** CS - pin 9 |
||||
|
||||
LED on pin 5 |
||||
|
||||
This example code is in the public domain. |
||||
|
||||
*/ |
||||
#include <SPI.h> |
||||
#include <SD.h> |
||||
|
||||
#define PIN_SPI_DATA 9 |
||||
#define PIN_SPI_CHIP_SELECT 3 |
||||
|
||||
File myFile; |
||||
|
||||
void setup() |
||||
{ |
||||
int i; |
||||
Serial.begin(9600); |
||||
Serial.println("\r\nHobbytronics Test Program for SD card..."); |
||||
Serial.println("Initializing SD card..."); |
||||
// On the Ethernet Shield, CS is pin 4. It's set as an output by default.
|
||||
// Note that even if it's not used as the CS pin, the hardware SS pin
|
||||
// (10 on most Arduino boards, 53 on the Mega) must be left as an output
|
||||
// or the SD library functions will not work.
|
||||
pinMode(PIN_SPI_CHIP_SELECT, OUTPUT); |
||||
|
||||
if (!SD.begin(PIN_SPI_DATA)) { |
||||
Serial.println("initialization failed!"); |
||||
return; |
||||
} |
||||
Serial.println("initialization done."); |
||||
|
||||
if (SD.exists("test.txt")) |
||||
SD.remove("test.txt"); |
||||
|
||||
myFile = SD.open("test.txt", FILE_WRITE); |
||||
|
||||
// if the file opened okay, write to it:
|
||||
if (myFile) { |
||||
Serial.println("Writing to test.txt..."); |
||||
Serial.println("Hobbytronics Test"); |
||||
for(i=0; i<20; i++) |
||||
{ |
||||
myFile.println("Hobbytronics Test of file writing"); |
||||
} |
||||
|
||||
// close the file:
|
||||
myFile.close(); |
||||
Serial.println("done."); |
||||
} else { |
||||
// if the file didn't open, print an error:
|
||||
Serial.println("error opening test.txt"); |
||||
} |
||||
|
||||
// re-open the file for reading:
|
||||
Serial.println("\n\rReading from test.txt..."); |
||||
myFile = SD.open("test.txt"); |
||||
if (myFile) { |
||||
|
||||
// read from the file until there's nothing else in it:
|
||||
while (myFile.available()) { |
||||
Serial.write(myFile.read()); |
||||
} |
||||
|
||||
// close the file:
|
||||
myFile.close(); |
||||
} else { |
||||
// if the file didn't open, print an error:
|
||||
Serial.println("error opening test.txt"); |
||||
} |
||||
Serial.println("Test Complete."); |
||||
} |
||||
|
||||
void loop() |
||||
{ |
||||
// nothing happens after setup
|
||||
} |
Loading…
Reference in new issue