diff --git a/HullPixelBotDance/HullPixelBotDance.ino b/HullPixelBotDance/HullPixelBotDance.ino
new file mode 100644
index 0000000..e7e97e4
--- /dev/null
+++ b/HullPixelBotDance/HullPixelBotDance.ino
@@ -0,0 +1,101 @@
+// This example drives the stepper motors directly
+// It makes the robot perform the "HullPixelBot Dance"
+// See if you can change the moves.
+// www.robmiles.com/hullpixelbot
+////////////////////////////////////////////////
+
+//declare variables for the motor pins
+int rmotorPin1 = 0;   // Blue   - 28BYJ48 pin 1
+int rmotorPin2 = 1;   // Pink   - 28BYJ48 pin 2
+int rmotorPin3 = 2;   // Yellow - 28BYJ48 pin 3
+int rmotorPin4 = 3;   // Orange - 28BYJ48 pin 4
+                      // Red    - 28BYJ48 pin 5 (VCC)
+
+int lmotorPin1 = 4;   // Blue   - 28BYJ48 pin 1
+int lmotorPin2 = 5;   // Pink   - 28BYJ48 pin 2
+int lmotorPin3 = 6;   // Yellow - 28BYJ48 pin 3
+int lmotorPin4 = 7;   // Orange - 28BYJ48 pin 4
+                      // Red    - 28BYJ48 pin 5 (VCC)
+
+
+int motorSpeed = 1200;  //variable to set stepper speed
+int count = 0;          // count of steps made
+int countsperrev = 512; // number of steps per full revolution
+int lookup[8] = {B01000, B01100, B00100, B00110, B00010, B00011, B00001, B01001};
+
+
+//////////////////////////////////////////////////////////////////////////////
+ void setup() {
+   //declare the motor pins as outputs
+   pinMode(lmotorPin1, OUTPUT);
+   pinMode(lmotorPin2, OUTPUT);
+   pinMode(lmotorPin3, OUTPUT);
+   pinMode(lmotorPin4, OUTPUT);
+   pinMode(rmotorPin1, OUTPUT);
+   pinMode(rmotorPin2, OUTPUT);
+   pinMode(rmotorPin3, OUTPUT);
+   pinMode(rmotorPin4, OUTPUT);
+   Serial.begin(9600);
+ }
+
+const int STOP = 0;
+const int FORWARD = 1;
+const int BACK = 2;
+const int LEFT = 3;
+const int RIGHT = 4;
+
+int moveState = FORWARD;
+
+void loop(){
+   if(count < countsperrev ) {
+     moveStep();
+   }
+   else 
+   {
+    moveState++;
+    if(moveState > RIGHT)
+      moveState = FORWARD;
+    count=0;
+   }
+   count++;
+}
+
+void moveStep()
+{
+   for(int i = 0; i < 8; i++)
+   {
+    switch(moveState)
+    {
+      case STOP:
+        return;
+      case FORWARD:
+        setOutputDir(i,7-i);
+        break;
+      case BACK:
+        setOutputDir(7-i,i);
+        break;
+      case LEFT:
+        setOutputDir(7-i,7-i);
+        break;
+      case RIGHT:
+        setOutputDir(i,i);
+        break;
+    }
+     delayMicroseconds(motorSpeed);
+   }
+}
+
+void setOutputDir(int leftOut, int rightOut)
+{
+  
+   digitalWrite(lmotorPin1, bitRead(lookup[leftOut], 0));
+   digitalWrite(lmotorPin2, bitRead(lookup[leftOut], 1));
+   digitalWrite(lmotorPin3, bitRead(lookup[leftOut], 2));
+   digitalWrite(lmotorPin4, bitRead(lookup[leftOut], 3));
+
+   digitalWrite(rmotorPin1, bitRead(lookup[rightOut], 0));
+   digitalWrite(rmotorPin2, bitRead(lookup[rightOut], 1));
+   digitalWrite(rmotorPin3, bitRead(lookup[rightOut], 2));
+   digitalWrite(rmotorPin4, bitRead(lookup[rightOut], 3));
+}
+