#include "settings.h"
#include <Arduino.h>
#include <TinyGPS++.h>
#include <MemoryFree.h>

#include "random.h"
// BAD PRACTICE: For some extremely strange reason, the Arduino IDE doesn't pick up random.cpp like it does our other source files - so we've got to explicitly include it here. If we had control over the build process (which we don't), we've use a Makefile here that handled this better.
#include "random.cpp"
#include "gps.h"
#include "peripheral.h"
#include "storage.h"
#include "power.h"
#include "transmission.h"


void setup() {
	Serial.begin(BAUD_PC);
	Serial.println(F("[main] Starting"));
	random_begin();
	
	Serial.println(freeMemory(), DEC);
	GPSLocation gps_data = gps_fetch();
	Serial.println(freeMemory(), DEC);
	
	Serial.print(F("[main] Location ")); Serial.print(gps_data.lat); Serial.print(F(", ")); Serial.println(gps_data.lng);
	
	uint32_t id = random_get();
	
	Serial.print(F("[main] Id "));
	Serial.println(id);
	
	// Activate microSD card breakout board on the SPI bus
	
	peripheral_register(PIN_SPI_CS_RFM95);
	peripheral_register(PIN_SPI_CS_SD);
	
	peripheral_unsilence(PIN_SPI_CS_SD);
	
	store_init();
	Serial.println(freeMemory(), DEC);
	store_reading(id, gps_data);
	Serial.println(freeMemory(), DEC);
	#ifdef SD_DEBUG_ENABLED
	store_debug(gps_data.time, 19);
	#endif
	Serial.println(freeMemory(), DEC);
	store_end();
	Serial.println(freeMemory(), DEC);
	
	// ------------------------------------------------------------------------
	
	// Activate the RFM95
	peripheral_switch(PIN_SPI_CS_SD, PIN_SPI_CS_RFM95);
	
	uint8_t message[] = "testing";
	
	// transmit_init();
	// transmit_send(message, 7);
	
	
	power_off(); // Doesn't return
}

void loop() {
	
}