From 7e9e17cd23c3a1fd464671e5e8d497bccc63f2ea Mon Sep 17 00:00:00 2001
From: Starbeamrainbowlabs <sbrl@starbeamrainbowlabs.com>
Date: Mon, 20 May 2019 11:55:28 +0100
Subject: [PATCH] Fold parts list into README

---
 Parts-list.txt | 66 --------------------------------------------------
 README.md      | 15 +++++++++++-
 2 files changed, 14 insertions(+), 67 deletions(-)
 delete mode 100644 Parts-list.txt

diff --git a/Parts-list.txt b/Parts-list.txt
deleted file mode 100644
index cf68b1b..0000000
--- a/Parts-list.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-MicroSD Card Breakout Board: https://shop.pimoroni.com/products/adafruit-microsd-card-breakout-board#description
-
-This is an example. Any Arduino-compatible microSD card slot will do.
-
-MicroSD Card: https://smile.amazon.co.uk/SanDisk-microSDHC-Memory-Adapter-Performance/dp/B073K14CVB/
-
-Again, any card that's 1GiB+ will do.
-
-Arduino Uno: https://smile.amazon.co.uk/Elegoo-Board-ATmega328P-ATMEGA16U2-Arduino/dp/B01EWOE0UU/
-
-Any will do.
-
-RFM95 + Breakout: https://shop.pimoroni.com/products/adafruit-rfm95w-lora-radio-transceiver-breakout?variant=19595325639
-
-The LoRa radio modem. All-in-one.
-
-If the above isn't possible, then the following will be needed:
-
-Raw RFM95: https://www.aliexpress.com/item/RFM95-RFM95-wireless-transceiver-module-LoRa-spread-spectrum-communication-868MHz-915MHz-SX1276-16-16mm-8000m/32811523237.html
-
-A raw RFM95. Only needed if the RFM95 + Breakout isn't possible. Requires the below breakout board separately.
-
-RFM95 Breakout: https://www.tindie.com/products/leonahi/rfm95-lora-breakout-board/
-
-An RFM95 breakout board. Only needed if the above is chosen.
-
-3.3v - 5v level shifter: https://smile.amazon.co.uk/HILABEE-Converter-Bi-Directional-Shifter-8-Channel/dp/B07LFFFRD9/
-
-Only needed if a raw RFM95 is bought.
-
-GPS Module: https://thepihut.com/products/gps-module-with-enclosure?variant=27741075537
-
-Any arduino-compatible GPS board is fine.
-
-Breadboard: https://shop.pimoroni.com/products/solderless-breadboard-400-point
-
-Very useful for designing circuits. Not essential, as I think I've got one at home lying around.
-
-Jumper cables:
- - https://thepihut.com/products/adafruit-premium-female-male-extension-jumper-wires-20-x-3
- - https://thepihut.com/products/adafruit-premium-male-male-jumper-wires-20-x-6-150mm
- - https://thepihut.com/products/adafruit-premium-female-female-jumper-wires-20-x-6-150mm
-
-Just examples. I'll of course need some jumper cables to put it all together with. I should imagine the department has some of these already?
-
-Battery: https://smile.amazon.co.uk/Anker-PowerCore-Aluminum-Portable-Lipstick-Sized-Black/dp/B005QI1A8C/
-
-Size unknown, so this is _not_ to be included in the initial purchase. I'll need to run some tests to see how much power it uses to figure outt he right battery size.
-
-Project box: https://smile.amazon.co.uk/waterproof-plastic-Enclosure-Power-junction-Grey/dp/B01JHBHNMA/
-
-Only needed if I can't gain access to the Fab Lab to 3D-print one.
-
-TPL-5111: https://www.adafruit.com/product/3573
-
-A brilliant and essential board that reduces power consumption by turning an arduino device on and off at regular intervals.
-
-Micro usb breakout: https://www.adafruit.com/product/1833
-
-Needed to interface with the battery & insert the TPL-5111 in between the battery & the Arduino.
-
-
-
-TODO: Add the following: Micro-usb cable, mimcro-usb power intake
-
-TODO: Merge this into the README
diff --git a/README.md b/README.md
index 4725ac0..f6e9652 100644
--- a/README.md
+++ b/README.md
@@ -1,3 +1,16 @@
 # Msc-Summer-Project
 
-My Msc Summer Project
\ No newline at end of file
+> My Msc Summer Project
+
+## Hardware Used
+ - [RFM95 w/ breakout](https://onecall.farnell.com/seeed-studio/114990615/868mhz-dragino-lora-shield-for/dp/SC14518) (alternatively [this](https://shop.pimoroni.com/products/adafruit-rfm95w-lora-radio-transceiver-breakout?variant=19595325639))
+ - [GPS](https://www.hobbytronics.co.uk/ublox-gps-neo6m) (or [this](https://thepihut.com/products/gps-module-with-enclosure?variant=27741075537))
+ - [microSD breakout](https://www.hobbytronics.co.uk/microsd-card-regulated-v2)
+ - DC in + USB-a power regulator (or maybe [this](https://www.adafruit.com/product/1833))
+ - [microSD Card](https://smile.amazon.co.uk/SanDisk-microSDHC-Memory-Adapter-Performance/dp/B073K14CVB/) - any card that's 1GiB+ will do.
+ - [Arduino Uno](https://smile.amazon.co.uk/Elegoo-Board-ATmega328P-ATMEGA16U2-Arduino/dp/B01EWOE0UU/)
+ - [Breadboard](https://shop.pimoroni.com/products/solderless-breadboard-400-point)
+ - Jumper cables (e.g. [a](https://thepihut.com/products/adafruit-premium-female-male-extension-jumper-wires-20-x-3), [b](https://thepihut.com/products/adafruit-premium-male-male-jumper-wires-20-x-6-150mm), and [c](https://thepihut.com/products/adafruit-premium-female-female-jumper-wires-20-x-6-150mm))
+ - [Battery](https://smile.amazon.co.uk/Anker-PowerCore-Aluminum-Portable-Lipstick-Sized-Black/dp/B005QI1A8C/) - Size currently unknown - I'll need to run some tests to see how much power it uses to figure out the right battery size.
+ - [Project box](https://smile.amazon.co.uk/waterproof-plastic-Enclosure-Power-junction-Grey/dp/B01JHBHNMA/) - if we can't 3D print one
+ - [TPL-5111](https://www.adafruit.com/product/3573) - also available from Pimoroni
